SyPly Plywood: Quality and Safety Certificates, Promotional materials

from 16.07.24 to 14.07.27

Declaration of conformity of particle boards P2, covered with films, emission class E1

The products of SPM ltd - chipboards, covered with films, type P2, formaldehyde emission class E1 - meets the requirements of regulatory documents GOST 32289-2013.

Download declaration (0,92 Mb) (print)

from 16.07.24 to 14.07.27

Declaration of conformity of particle boards P5, covered with films, emission class E1

The products of SPM ltd - chipboards, covered with films, type P5, formaldehyde emission class E1 - meets the requirements of regulatory documents GOST 32289-2013.

Download declaration (0,92 Mb) (print)

from 25.04.24 to 23.04.27

Declaration of conformity of WBP birch plywood

The products of SPM ltd - general purpose birch plywood, grade WBP, emission class E0.5 (serial production) - meets the requirements of regulatory documents GOST 3916.1-2018.

from 27.03.24 to 26.03.27

Declaration of conformity of MR birch plywood

The products of SPM ltd - general purpose birch plywood, grade MR, emission class E0.5 (serial production) - meets the requirements of regulatory documents GOST 3916.1-2018.

from 24.02.24 to 23.02.27

Certificate of conformity for birch structural MR plywood

The products of SPM ltd - general purpose birch plywood, grade MR, emission class E0.5 (serial production) - meets the requirements of regulatory documents TS 16.21.12-001-44769167-2020 and GOST 3916.1-2018.

Загрузить PDF (0,20 Mb) (print)

from 21.02.24 to 20.02.27

Certificate of Conformity of laminated plywood brand of Ltd "SPM" the technical requirements and GOST (WBP)

Products of SPM Ltd – faced birch plywood, emission class E0.5 – meets the requirements of regulatory documents TU 16/21/12-002-44769167-2020 and GOST R 53920-2010.

from 14.02.24 to 13.02.26

Certificate of conformity of birch plywood to ULEF CARB (California Air Resources Board) requirements

Birch plywood produced by the Syktyvkar Plywood Mill complies with the requirements of ULEF CARB.

Download in PDF format (1,26 Mb) (print)

from 23.06.23 to 29.12.25

CE-Certificate of Factory Production Control to birch plywood 2787 - CPR - 01321.

In compliance with Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011 (the Construction Products Regulation or CPR) this certificate attests that all provisions concerning the assessment and verification of constancy of performance described in Annex ZA of the standard EN 13986:2004; EN 13986:2004+A1:2015 under system 2+ are applied and that the factory production control is assessed to be in conformity with the applicable requirements.

from 04.02.22

Test results according to DIN 51130 on the anti-slip properties of the surface of plywood Carat 120/120 gr – class R10 to the requirements of TS and GOST

The results of measurements of the coefficient of friction (according to DIN 51130) make it possible to evaluate plywood with a mesh surface (F/Ct) as a necessary building material when installing flooring or other structures in which wear resistance and anti-slip properties are an important criterion.

(0,40 Mb) (print)
(2,49 Mb) (print)

from 04.02.22

Test results according to DIN 51130 on the anti-slip properties of the surface of plywood Carat 120/220 gr - class R10 to the requirements of TS and GOST

The results of measurements of the coefficient of friction (according to DIN 51130) make it possible to evaluate plywood with a mesh surface (F/Ct) as a necessary building material when installing flooring or other structures in which wear resistance and anti-slip properties are an important criterion.

(0,40 Mb) (print)
(2,49 Mb) (print)

from 04.02.22

Test results according to DIN 51130 on the anti-slip properties of the surface of plywood Diamond 120/120 gr - class R13 to the requirements of TS and GOST

The results of measurements of the coefficient of friction (according to DIN 51130) make it possible to evaluate plywood with a mesh surface (F/D) as a necessary building material when installing flooring or other structures in which wear resistance and anti-slip properties are an important criterion.

(0,40 Mb) (print)
(2,49 Mb) (print)

from 04.02.22

Test results according to DIN 51130 on the anti-slip properties of the surface of plywood Diamond 120/220 gr - class R12 to the requirements of TS and GOST

The results of measurements of the coefficient of friction (according to DIN 51130) make it possible to evaluate plywood with a mesh surface (F/D) as a necessary building material when installing flooring or other structures in which wear resistance and anti-slip properties are an important criterion.

(0,40 Mb) (print)
(2,49 Mb) (print)

from 04.02.22

Test results according to DIN 51130 on the anti-slip properties of the surface of plywood Hexa 120/120 gr - class R12 to the requirements of TS and GOST

The results of measurements of the coefficient of friction (according to DIN 51130) make it possible to evaluate plywood with a mesh surface (F/H) as a necessary building material when installing flooring or other structures in which wear resistance and anti-slip properties are an important criterion.

(0,40 Mb) (print)
(2,49 Mb) (print)

from 04.02.22

Test results according to DIN 51130 on the anti-slip properties of the surface of plywood Hexa 120/220 gr - class R12 to the requirements of TS and GOST

The results of measurements of the coefficient of friction (according to DIN 51130) make it possible to evaluate plywood with a mesh surface (F/H) as a necessary building material when installing flooring or other structures in which wear resistance and anti-slip properties are an important criterion.

(0,40 Mb) (print)
(2,49 Mb) (print)

from 04.02.22

Test results according to DIN 51130 on the anti-slip properties of the surface of plywood Transport 120/120 gr - class R10 to the requirements of TS and GOST

The results of measurements of the coefficient of friction (according to DIN 51130) make it possible to evaluate plywood with a mesh surface (F/T) as a necessary building material when installing flooring or other structures in which wear resistance and anti-slip properties are an important criterion.

(0,40 Mb) (print)
(2,49 Mb) (print)

from 04.02.22

Test results according to DIN 51130 on the anti-slip properties of the surface of plywood Transport 120/220 gr - class R10 to the requirements of TS and GOST

The results of measurements of the coefficient of friction (according to DIN 51130) make it possible to evaluate plywood with a mesh surface (F/T) as a necessary building material when installing flooring or other structures in which wear resistance and anti-slip properties are an important criterion.

(0,40 Mb) (print)
(2,49 Mb) (print)

from 04.11.19

Test results according to DIN 51130 on the anti-slip properties of the surface of plywood Smart 120 gr - class R11 to the requirements of TS and GOST

The results of measurements of the coefficient of friction (according to DIN 51130) make it possible to evaluate plywood with a mesh surface (F/W) as a necessary building material when installing flooring or other structures in which wear resistance and anti-slip properties are an important criterion.

(0,41 Mb) (print)
(2,49 Mb) (print)

from 04.11.19

Test results according to DIN 51130 on the anti-slip properties of the surface of plywood DBR 220 gr - class R12 to the requirements of TS and GOST

The results of measurements of the coefficient of friction (according to DIN 51130) make it possible to evaluate plywood with a mesh surface (F/W) as a necessary building material when installing flooring or other structures in which wear resistance and anti-slip properties are an important criterion.

(0,41 Mb) (print)
(2,49 Mb) (print)

from 04.11.19

Test results according to DIN 51130 on the anti-slip properties of the surface of plywood DBR 120 gr - class R13 to the requirements of TS and GOST

The results of measurements of the coefficient of friction (according to DIN 51130) make it possible to evaluate plywood with a mesh surface (F/W) as a necessary building material when installing flooring or other structures in which wear resistance and anti-slip properties are an important criterion.

(0,40 Mb) (print)
(2,49 Mb) (print)

from 04.11.19

Test results according to DIN 51130 on the anti-slip properties of the surface of plywood DBR 125 gr - class R13 to the requirements of TS and GOST

The results of measurements of the coefficient of friction (according to DIN 51130) make it possible to evaluate plywood with a mesh surface (F/W) as a necessary building material when installing flooring or other structures in which wear resistance and anti-slip properties are an important criterion.

(0,40 Mb) (print)
(2,49 Mb) (print)

from 12.02.24

Expert opinion of the hygienic safety

The products of SPM ltd comply with the requirements of Chapter 2, Section 6 p. 3.5, section 13 “Unified sanitary-epidemiological and hygienic requirements for products (goods) subject to sanitary-epidemiological supervision (control)”, approved by decision of the Customs Union Commission dated May 28, 2010 No. 299, SanPiN 2.6.1.2523-09 “ Radiation safety standards NRB-99/2009", SP 2.6.1.2612-10 "Basic sanitary rules for ensuring radiation safety (OSPORB-99/2010)"

from 30.07.21 to 29.07.26

Fire certificate of conformity for birch plywood of advanced moisture-resistance, faced with thermoactive polymer film.

SyPly birch plywood of advanced moisture-resistance, faced with thermoactive polymer film complies with fire safety:
flammability group - G4,
flammability group - B2,
group of smoke-forming ability - D2,
Group toxicity of combustion products - T1.

from 30.07.21 to 29.07.26

Fire certificate for Birch plywood for construction WBP.

SyPly Birch plywood for construction complies with fire safety:
flammability group - G4,
flammability group - B2,
group of smoke-forming ability - D3,
Group toxicity of combustion products - T2.

from 14.02.24 to 14.02.26

EPA TSCA VI - Certificate for compliance with requirements of the US Environmental Protection Agency (EPA)

Birch Plywood produced by the Syktyvkar plywood factory complies with the requirements of the US EPA (EPA TSCA VI) ULEF

Download in PDF format (1,23 Mb) (print)

from 18.01.23 to 17.01.28

Certificate of Environmental Product Declaration (EPD) registration in accordance with ISO 14025:2006 and EN 15804:2012+A2:2019/AC:2021

Birch plywood produced by the Syktyvkar plywood factory complies with the environmental requirements of ISO 14025:2006 and EN 15804:2012+A2:2019/AC:2021.

Download certificate (0,21 Mb) (print)

from 09.01.23 to 08.01.28

Environmental Product Declaration (EPD) in accordance with ISO 14025:2006 and EN 15804:2012+A2:2019/AC:2021

Birch plywood produced by the Syktyvkar plywood factory complies with the environmental requirements of ISO 14025:2006 and EN 15804:2012+A2:2019/AC:2021.

from 15.01.24

Catalogue SyPly DESIGN 2024

from 01.08.23

SyPly plywood catalogue

from 25.03.24

Catalogue: SyPly plywood Application

from 19.12.23

SyPly LOGO leaflet

Download in PDF format (6,62 Mb) (print)

from 01.08.23

SyPly DESIGN leaflet

from 15.07.22

SyPly PRIMER leaflet: painting and digital printing

SyPly PRIMER plywood is the ideal base for creative ideasDue to the special properties of the film, you can easily give the product the desired shade and pattern.

Download in PDF format (2,66 Mb) (print)

from 14.10.21

SyPly new textures leaflet

(0,62 Mb) (print)

from 21.05.21

SyPly™ plywood handbook

from 21.10.19

SyPly ProFFit Leaflet

Фанера SyPly ProFFit – уникальный продукт, разработанный и предлагаемый исключительно Сыктывкарским Фанерным Заводом.

SyPly ProFFit – высококачественная ламинированная фанера с чередованием березового и осинового шпона во внутренних слоях.

Преимущества SyPly ProFFit:

Меньший вес листа фанеры. 1 лист весит меньше на 8% по сравнению со 100% березовой фанерой.
Легкость обработки и раскроя.
Прочное клеевое соединение.
Высокие эксплуатационные свойства.
Более 50 циклов применения в монолитном домостроении.

Ламинированная фанера SyPly ProFFit незаменима при изготовлении форм многоразовой бетонной опалубки.

There are no attached files

from 21.10.19

SyPly PRIMER Leflet

Скачать в формате PDF (4,38 Mb) (print)

from 10.06.05

CERTIFICATE for the PlyPan trademark

This certificate is issued for the PlyPan trademark (service mark) to Syktyvkar Plywood Mill LTD in respect of the 19th class of goods (services) – "non-metal building materials; ...". The certificate is valid until August 24, 2011. Duplicate applications №1 EVIDENCE indicates a change of the trademark right holder address.

from 24.03.05 to 15.10.34

CERTIFICATE for SyPly trademark

Based on the Law of the Russian Federation "On Trademarks, Service Marks and Appellations of Origin of Goods", which entered into force on September 23, 1992 (as amended on December 11, 2002), the Federal Service for Intellectual Property, Patents and Trademarks issued a certificate for the trademark "SyPly" to the Company Syktyvkar Plywood Mill ltd.

from 25.11.15

SyPly birch plywood – the winner of the national competition '"100 BEST PRODUCTS OF RUSSIA”

Awarded to the winner of the competition "100 BEST PRODUCTS OF RUSSIA" for high achievements in the field of quality and safety of domestic goods (products and services) – SyPly structural birch plywood.

from 25.11.15

SyPly laminated plywood – student of the national competition "100 BEST PRODUCTS OF RUSSIA"

The diploma is awarded to the national competition finalist of the "100 BEST PRODUCTS OF RUSSIA" for high achievements in improving the quality and safety of domestic goods (products and services) - plywood SyPly.

from 15.11.11

SyPly laminated plywood – student of the national competition "100 BEST PRODUCTS OF RUSSIA"

The diploma is awarded to the national competition finalist of the "100 BEST PRODUCTS OF RUSSIA" for high achievements in improving the quality and safety of domestic goods (products and services) - plywood SyPly.

from 15.11.11

SyPly birch plywood – the winner of the national competition "100 BEST PRODUCTS OF RUSSIA”

The diploma of the laureate is awarded to the finalist of the All-Russian competition of the program "100 BEST PRODUCTS OF RUSSIA" for achieving high results in improving the quality and safety of domestic goods (products and services) – SyPly structural birch plywood.

from 15.03.08

Certificate of Appreciation

LLP "Integra plus" city Almaty is grateful for the manufacture of a decent product (laminated plywood) used in the construction of formwork and confirms its turnover of not less than 60 times. For builders, this factor is significant.

Download 200dpi (0,36 Mb) (print)

from 10.11.04

DIPLOMA to the winner of the contest "The Government of the Komi Republic Prize in the field of quality"

Awarded to the winner of the competition for the production and sale of high quality products. The laureate has the right to use the logo of the competition for advertising purposes, indicating the year of receipt of the diploma for 2 years